RPCEmu 0.8.14 [DYNAREC NO_DEBUG]
Build: 32-bit binary
Compiler: GCC version 4.6.2
OS: Microsoft Windows
OS: PlatformId = 2
OS: MajorVersion = 6
OS: MinorVersion = 1
OS: ProductType = 1
OS: SuiteMask = 0x100
OS: ServicePackMajor = 1
OS: ServicePackMinor = 0
OS: ProcessorArchitecture = 9
OS: SystemMetricsServerR2 = 0
OS: ProductInfoType = 1
Allegro version ID: Allegro 4.4.2, MinGW32
Desktop Resolution: 1920 x 1080
Host Colour Depth: 32
Working Directory: C:\RISCOS\RPCEmu\V0.8.14-spoon\RPCEmuRO3_7
loadconfig: model = "RPCSA"
loadconfig: mouse_twobutton = "0"
loadconfig: network_type = "off"
loadconfig: mouse_following = "1"
loadconfig: cdrom_type = "0"
loadconfig: cdrom_enabled = "1"
loadconfig: refresh_rate = "60"
loadconfig: stretch_mode = "1"
loadconfig: sound_enabled = "0"
loadconfig: vram_size = "2"
loadconfig: mem_size = "128"
loadconfig: ipaddress = "172.31.0.1"
loadconfig: cpu_idle = "0"
romload: Loaded 'ROM370' 4194304 bytes
romload: Total ROM size 4 MB
romload: ROM patch applied: 8MB VRAM RISC OS 3.70
initpodulerom: Successfully loaded 'hostfs,ffa' into podulerom
initpodulerom: Successfully loaded 'hostfsfiler,ffa' into podulerom
initpodulerom: Successfully loaded 'SyncClock,ffa' into podulerom
RPCEmu: Machine reset
RPCEmu: Machine reset complete
HostFS: Registration request version 3 accepted
Hi,
normally I only use RPCEmu with RO4 and RO5. Today, I tried to use
it with RO 3.7. A fresh install, putting UniBoot into HostFS. Boot
fails with a strange
"Internal Error: undefined instruction at &000A5DBC"
After that, not even !Edit runs (abort on data transfer).
Config that fails: StrongARM, 2 MB VRAM, 128 MB RAM.
0.8.13 works fine with the same config.
0.8.14 works fine with RO4 and RO5 with the same config.
Changing the config to e.g. 64 MB RAM or ARM610, 0.8.14 starts working.
I have not tried all permutations :-)
rpclog attached.
Steffen
--
Steffen Huber LambdaComm System - Welcome to Trollinger Country
steffen@huber-net.de
Private homepage http://www.huber-net.de/
RISC OS Blog http://riscosblog.huber-net.de/
No comments:
Post a Comment