Re: [Rpcemu] RPCEmu 0.8.14

In article <554ed55dd6dave@triffid.co.uk>,
Dave Symes <dave@triffid.co.uk> wrote:
> In article <20160208145008.GA30204@spod.org>,
> Peter Howkins <rpcemu.howkins@marutan.net> wrote:

> [Snippy]
> > - RISC OS Select 4i2 to 6i1 (6.06 to 6.20) now boot 'out of the box'
> > due to clearing the *unplug bits in the distributed cmos.ram file.
> > If applying the upgrade to an existing install you must use the
> > provided cmos.ram file and then apply your changes to cmos settings
> > afterwards.

> [Snippy]

> I've tried upgrading an existing 6.20 install with everything from the
> new archive except (Obviously) HostFS and the 6.20 Rom.

> With your cmos.ram file in place it gets a little way through the boot
> process then halts and fails with "Boot failed"

> Sorry, no furthur info possible as it can't get past that point.

> If I replace your cmos.ram file with the (my) original from the 0.8.13
> install then 0.8.14 boots perfectly okay.

> ??

> Dave

Well, Just tried it on a RPCEmu with RISC OS 5.22 installed and it fails
as before.

Replace cmos.ram with original and it works okay.

?

Dave

--

Dave Triffid

_______________________________________________
Rpcemu mailing list
Rpcemu@riscos.info
http://www.riscos.info/cgi-bin/mailman/listinfo/rpcemu