Re: [Rpcemu] RPCEmu 0.8.14

On Mon, Feb 08, 2016 at 07:24:22PM +0000, Dave Symes wrote:
> In article <20160208145008.GA30204@spod.org>,
> Peter Howkins <rpcemu.howkins@marutan.net> wrote:
>
> [Snippy]
> > - RISC OS Select 4i2 to 6i1 (6.06 to 6.20) now boot 'out of the box'
> > due to clearing the *unplug bits in the distributed cmos.ram file.
> > If applying the upgrade to an existing install you must use the
> > provided cmos.ram file and then apply your changes to cmos settings
> > afterwards.
>
> [Snippy]
>
> I've tried upgrading an existing 6.20 install with everything from the new
> archive except (Obviously) HostFS and the 6.20 Rom.
>
> With your cmos.ram file in place it gets a little way through the boot
> process then halts and fails with "Boot failed"
>
> Sorry, no furthur info possible as it can't get past that point.
>
> If I replace your cmos.ram file with the (my) original from the 0.8.13
> install then 0.8.14 boots perfectly okay.

For all bug reports please attach the rpclog.txt file that's created.

Also, just to check the obvious, have you done the following

*configure filesystem hostfs

Peter

--
Peter Howkins
peter.howkins@marutan.net

_______________________________________________
Rpcemu mailing list
Rpcemu@riscos.info
http://www.riscos.info/cgi-bin/mailman/listinfo/rpcemu