Re: [Rpcemu] RPCEmu 0.8.14

In article <20160208145008.GA30204@spod.org>,
Peter Howkins <rpcemu.howkins@marutan.net> wrote:

[Snippy]
> - RISC OS Select 4i2 to 6i1 (6.06 to 6.20) now boot 'out of the box'
> due to clearing the *unplug bits in the distributed cmos.ram file.
> If applying the upgrade to an existing install you must use the
> provided cmos.ram file and then apply your changes to cmos settings
> afterwards.

[Snippy]

I've tried upgrading an existing 6.20 install with everything from the new
archive except (Obviously) HostFS and the 6.20 Rom.

With your cmos.ram file in place it gets a little way through the boot
process then halts and fails with "Boot failed"

Sorry, no furthur info possible as it can't get past that point.

If I replace your cmos.ram file with the (my) original from the 0.8.13
install then 0.8.14 boots perfectly okay.

??

Dave

--

Dave Triffid

_______________________________________________
Rpcemu mailing list
Rpcemu@riscos.info
http://www.riscos.info/cgi-bin/mailman/listinfo/rpcemu