Re: [Rpcemu] RPCEmu 0.8.14

In article <20160208203006.GE30204@spod.org>,
Peter Howkins <rpcemu.howkins@marutan.net> wrote:
> On Mon, Feb 08, 2016 at 07:24:22PM +0000, Dave Symes wrote:
> > In article <20160208145008.GA30204@spod.org>,
> > Peter Howkins <rpcemu.howkins@marutan.net> wrote:
> >
> > [Snippy]
> > > - RISC OS Select 4i2 to 6i1 (6.06 to 6.20) now boot 'out of the
> > > box' due to clearing the *unplug bits in the distributed
> > > cmos.ram file. If applying the upgrade to an existing install
> > > you must use the provided cmos.ram file and then apply your
> > > changes to cmos settings afterwards.
> >
> > [Snippy]
> >
> > I've tried upgrading an existing 6.20 install with everything from the
> > new archive except (Obviously) HostFS and the 6.20 Rom.
> >
> > With your cmos.ram file in place it gets a little way through the boot
> > process then halts and fails with "Boot failed"
> >
> > Sorry, no furthur info possible as it can't get past that point.
> >
> > If I replace your cmos.ram file with the (my) original from the 0.8.13
> > install then 0.8.14 boots perfectly okay.

> For all bug reports please attach the rpclog.txt file that's created.

> Also, just to check the obvious, have you done the following

> *configure filesystem hostfs

> Peter

That was a good catch Peter.
It never crossed my mind that I'd need to do that again. ;-)

Once done the beast came to life... Both 6.20 on 5.22.

Thanks
Dave

--

Dave Triffid

_______________________________________________
Rpcemu mailing list
Rpcemu@riscos.info
http://www.riscos.info/cgi-bin/mailman/listinfo/rpcemu