Re: [Rpcemu] Another connection problem

Small but important correction.I made tests again. Interface is OK under RISC OS with right MAC address.

When pinging something, packets are sent, answer is received by the bridge but does not reach the TAP interface.

Nota: the same TAP module works with OpenVPN.

Perhaps I should try with an old version of TAP?

By, David

2015-05-11 21:23 GMT+02:00 David Feugey <dfeugey@ascinfo.fr>:

Of course, I also tried to make it again from scratch with new TAP and new RPCemu set up, with exactly the same result: some error sometimes, and when no error, no network connection. All seems OK, but packets are not received by the TAP interface.

2015-05-11 21:20 GMT+02:00 David Feugey <dfeugey@ascinfo.fr>:

Yes. I also applied the commands to correct connection ; configured the ROS side ; and launched

 RPCEmu with network connection, and no alert.

I made this, http://www.marutan.net/rpcemu/manual/net-win.html

this http://www.marutan.net/rpcemu/manual/net-ro.html

and this http://www.marutan.net/rpcemu/manual/net-ro-bri.html

Of course, ping does not work

I suspect many possibilities:

1/ problem with 64 bit OS

2/ problem with version of TAP

3/ problem with RISC OS 5.22

4/ problem with RPCEmu

5/ all of this :)

Bye, David

2015-05-11 20:18 GMT+02:00 Dave Symes <dave@triffid.co.uk>:

In article
<CAC85+4KfPiyF6F4M0LjvyfNAoqbsTx76ooivFjygUyuqVkU91w@mail.gmail.com>,

   David Feugey <dfeugey@ascinfo.fr> wrote:
> My setup: Windows 7 Pro 64bit
> On the RISC OS side: RPCEMu, last version + RISC OS 5.22

> In the middle, me, almost no hair left :)

> I configured the bridge, put the right options, and no connection.
> No packets are received by the bridge. The other part (Windows one) works
> normally.

> Should I use a very specific of OpenVPN? Problem with IPv6 or 64bit?
> Problem with ROS 5.22?
> I don't need to connect every day. It's just for !Store.

> I would be so happy to get a simple 'client mode networking' a la Virtual
> Risc PC :)
> (would solve also lot of problems when connecting to DHCP network or
> multiples networks).

> Bye, David

One idle thought...
 You have been to Win side Control panel-Network Connections and after
selecting both the "rpcemu" and original interface, done the Menu "Bridge
Connections" bit?

Dave

--

Dave Triffid

_______________________________________________
Rpcemu mailing list
Rpcemu@riscos.info
http://www.riscos.info/cgi-bin/mailman/listinfo/rpcemu

--

Mobile : 06 76 67 91 60

--

Mobile : 06 76 67 91 60

--

Mobile : 06 76 67 91 60