Re: [Rpcemu] Another connection problem

Yes. I also applied the commands to correct connection ; configured the ROS side ; and launched

 RPCEmu with network connection, and no alert.

I made this, http://www.marutan.net/rpcemu/manual/net-win.html

this http://www.marutan.net/rpcemu/manual/net-ro.html

and this http://www.marutan.net/rpcemu/manual/net-ro-bri.html

Of course, ping does not work

I suspect many possibilities:

1/ problem with 64 bit OS

2/ problem with version of TAP

3/ problem with RISC OS 5.22

4/ problem with RPCEmu

5/ all of this :)

Bye, David

2015-05-11 20:18 GMT+02:00 Dave Symes <dave@triffid.co.uk>:

In article
<CAC85+4KfPiyF6F4M0LjvyfNAoqbsTx76ooivFjygUyuqVkU91w@mail.gmail.com>,

   David Feugey <dfeugey@ascinfo.fr> wrote:
> My setup: Windows 7 Pro 64bit
> On the RISC OS side: RPCEMu, last version + RISC OS 5.22

> In the middle, me, almost no hair left :)

> I configured the bridge, put the right options, and no connection.
> No packets are received by the bridge. The other part (Windows one) works
> normally.

> Should I use a very specific of OpenVPN? Problem with IPv6 or 64bit?
> Problem with ROS 5.22?
> I don't need to connect every day. It's just for !Store.

> I would be so happy to get a simple 'client mode networking' a la Virtual
> Risc PC :)
> (would solve also lot of problems when connecting to DHCP network or
> multiples networks).

> Bye, David

One idle thought...
 You have been to Win side Control panel-Network Connections and after
selecting both the "rpcemu" and original interface, done the Menu "Bridge
Connections" bit?

Dave

--

Dave Triffid

_______________________________________________
Rpcemu mailing list
Rpcemu@riscos.info
http://www.riscos.info/cgi-bin/mailman/listinfo/rpcemu

--

Mobile : 06 76 67 91 60