Re: [Rpcemu] Disc not understood

Op 20 jan. 2013, om 11:35 heeft george greenfield <george.greenfield@tiscali.co.uk> het volgende geschreven:

> In message <5310ebf1d4bob@mightyoak.org.uk>
> Bob Latham <bob@mightyoak.org.uk> wrote:
>
>> In article <20130118200238.4D7BE20353@orac.inputplus.co.uk>,
>> Ralph Corderoy <ralph@inputplus.co.uk> wrote:
> [snip]
>>
>> The hard disc image (long file names) was downloaded from
>> http://www.marutan.net/rpcemu/ unpacked, and placed at
>> Program files\RPCEmu.
>>
>> Using *status, I can see that idediscs is set to 1.
>>
>> I have not tried to format the disc.
>>
>> The disc from above says it is 262,080K bytes. The disc I used a couple of
>> years back is 262,081KB. I've tied both and neither work.
>
> You could try downloading the 1GB disk image. Based on over a year's
> experience with RPCEmu on a W7/64 PC, I'd question the usefulness of
> an HD4 limited to 256MB; my current !Boot is 447Mb on its own,
> including ScrapDirs and MPro spools….

I would recommend to download a small HD4 and put the rest on a HostFS disc. This way communication with other machines is a lot simpler.

Peter
RPCEmu v0.8.9 on a Mac


_______________________________________________
Rpcemu mailing list
Rpcemu@riscos.info
http://www.riscos.info/cgi-bin/mailman/listinfo/rpcemu