george greenfield <george.greenfield@tiscali.co.uk> wrote:
> The issue is with RO 5.19 surely, not RPCEmu? I'm running a W7(64-bit)
> system using RPCEmu 0.8.9/4.02 and networking is rock solid, settings
> are retained between reboots of the master PC, and in all ways the
> RPCEmu system behaves exactly like native hardware. I've set the
> network bridge up on a cabled connection with fixed IP addresses, and
> disabled DHCP in the router. The PC side connects wirelessly and
> obtains an IP address automatically, and that too is stable. Of course
> I would prefer to be running 5.19 and get the advantages over 4.02
> that would bring, but ATM reliable, hands-off (i.e. not having to
> rebuild settings after each reboot) networking is a must-have for me.
> Sounds like 5.19 is not there yet, unfortunately.
> George
No George, the same was happening with 5.17 I don't think it's a RPCEmu
problem as such, just the method used to network connect.
Dave
--
Dave Triffid
_______________________________________________
Rpcemu mailing list
Rpcemu@riscos.info
http://www.riscos.info/cgi-bin/mailman/listinfo/rpcemu
No comments:
Post a Comment