Re: [Rpcemu] Network setup question

In article <8c98e32753.old_coaster@old_coaster.yahoo.co.uk>,
Tony Moore <old_coaster@yahoo.co.uk> wrote:
> On 5 Mar 2013, Dave Symes <dave@triffid.co.uk> wrote:
> > In article <5327dac7dddave@triffid.co.uk>,
> > Dave Symes <dave@triffid.co.uk> wrote:
> >
> > > Ah indeedy, that seems to be the place and I now have networking on
> > > the Emu 6.20
> >
> > Still one remaining problem though. The Bridge on the PC W7 Pro
> > remains okay, but after a reboot the RPCEmu has lost it's config to
> > the bridge and I have to re-set it every time. (RPCEmu toolbar menu
> > Networking).
> >
> > Is there a bug here, or is there some way to make it persist after a
> > boot?

> Try setting the values in Program Files\RPCEmu\rpc.cfg to

> bridgename = rpcemu
> mouse_twobutton = 0
> network_type = ethernetbridging
> mouse_following = 1
> cdrom_type = 0
> cdrom_enabled = 0
> refresh_rate = 60
> stretch_mode = 1
> sound_enabled = 1
> vram_size = 2
> cpu_type = SA110
> mem_size = 128
> cpu_idle = 1

> I suspect that you may have mem_size > 128, which can cause problems.

> Tony


Thanks for the above note Tony.

New day, Wednesday, upon cold boot of the whole system, everything now
seems to be working/networking okay.

Most of the values here are the same, and as I'm aware of the > 128
problems... (Also on VRPC) that's what it's always been set at.

One question though. cpu-idle = 1 on your setup, on mine it's = 0
(obviously yours is On mine is Off) but in real terms what does it mean?

Thanks
Dave

--

Dave Triffid

_______________________________________________
Rpcemu mailing list
Rpcemu@riscos.info
http://www.riscos.info/cgi-bin/mailman/listinfo/rpcemu