Re: [Rpcemu] A configuration question or two

In message <b401312953.old_coaster@old_coaster.yahoo.co.uk>
Tony Moore <old_coaster@yahoo.co.uk> wrote:

> On 8 Mar 2013, Dave Symes <dave@triffid.co.uk> wrote:
>
> [snip]
>
[snip]
>
[snip]
>
> In case it may be of use, my MDF is below. You may find that it will
> work on your machine, simply by changing 760 to 860. If not, you'll need
> to tweak it, using MakeModes, or similar.
>
> # 1280 x 760 (60 Hz)
> startmode
> mode_name:1280 x 760 (60 Hz)
> x_res:1280
> y_res:760
> pixel_rate:72969
> h_timings:188,44,0,1280,0,0
> v_timings:2,32,0,760,0,10
> sync_pol:3
> endmode
>
> Tony

I recently managed to successfully edit a 1680 x 1050 mode to 1824 x
1026. The key things to change (assuming the above MDF was to be
altered to 1280 x 860, for example) are:

the mode_name [TO mode_name:1280 x 860 (60Hz)];

the y_res [TO y_res:860];

the v_timings line [TO v_timings:2,32,0,860,0,10].

Everything else can stay the same. I also made sure my homegrown mode
conformed to a 16:9 ratio but as Tony's existing mode doesn't conform
this probably isn't crucial. HTH,

George


--
george greenfield

_______________________________________________
Rpcemu mailing list
Rpcemu@riscos.info
http://www.riscos.info/cgi-bin/mailman/listinfo/rpcemu