Re: [Rpcemu] RISC OS 6.20 Install Guide

In article <03e2d01753.old_coaster@old_coaster.yahoo.co.uk>,
Tony Moore <old_coaster@yahoo.co.uk> wrote:
> On 2 Feb 2013, Dave Symes <dave@triffid.co.uk> wrote:
> > In article <5317b12244dave@triffid.co.uk>,
> > Dave Symes <dave@triffid.co.uk> wrote:
> > > In article <807b621753.old_coaster@old_coaster.yahoo.co.uk>,
> > > Tony Moore <old_coaster@yahoo.co.uk> wrote:
> >
> > [Snippy]
> >
> > > > Configure... > Windows > Windows > Menu slide > Off

> [snip]

> > > My problem I've discovered is this: On this real SARPC I have that
> > > menu, but on the RPCemu 6.20 install the windows configuration
> > > dialogue is quite different.

> [snip]

> > All (Multiple versions) versions I've done the change into 6.20 have
> > the wrong Configure tools. That includes one version that went from
> > 4.02 directly to 6.20 There were no intervening Select 4.nn versions
> > applied to this, my base version.
> >
> > Obviously manually transplanting from the real SARPC 600Hook to the
> > RPCemu 600Hook sorts that, but I wonder what else might be out... Even
> > more to the point, why has this happened?

> I installed RPCEmu 6.20, starting from a copy of 4.39. The 'Menu slide'
> option _is_ present in the result and, so far as I can tell, the other
> 6.20 config tools are also present in RO600Hook.

> RO600Hook is absent from 4.39 so, in 6.20, RO600Hook, and its contents,
> must have been created by RO6Instal. In your installation, is RO600Hook
> absent, or is it empty, or does it just contain the wrong config tools?

> Tony

Indeedy obviously RO600Hook is not in the 4.39 install.
It appears in the 6.20 upgrade, it just contains the wrong Config tools.

Dave

--

Dave Triffid

_______________________________________________
Rpcemu mailing list
Rpcemu@riscos.info
http://www.riscos.info/cgi-bin/mailman/listinfo/rpcemu