In article <mpro.n4p5g0002gp3402r4@wingsandbeaks.org.uk.invalid>,
Jeremy Nicoll - ml roinfo <jn.ml.roi.39@wingsandbeaks.org.uk> wrote:
> Dave Symes <dave@triffid.co.uk> wrote:
> >Not sure if this is a RPCEmu specific problem or not.
> >
> >Running RPCEmu 0.8.11 and RO 5.21 on Win 7 Pro.
> >
> >No matter how the clock is set, manual, or off the network, the correct
> >time only remains for around 10 seconds then it reverts back to being an
> >hour out.
> > If I switch DST off then it becomes 2 hours out. I've tried everything
> > I can think off, but it stubbornly will not set the correct time.
> > Doesn't matter if Analog or Digital is set, it still jumps back 1 hour.
> >
> > The Windows 7 clock is showing the correct time. <<<<<<<<<<<<<
> That might imply that you have a Windows time zone set at an hour
> different from GMT, but without DST, rather than being GMT and DST.
Sorry Jeremy I don't understand... Above <<<<<<<<<<<
Windows:
The Win 7 clock is set correctly.
Time Zone = (UTC) Dublin, Edinburgh, Lisbon, London.
Automatically Adjust clock for Daylight Saving Time is ticked.
The clock is set to Sync time over the network.
The clock is showing the absolute correct time of 17:34 now.
RPCEmu:
The RPCEmu 5.21 is showing 16:34
In the Time and date setting.
Locality: UTC+00:00 UK GMT
DST Active ticked
Switch DST automatically is ticked.
If not doing it manually, Set from Network is ticked.
pool.ntp.org
Clicking the "Try" button connects to the network, gets the time and it
corrects the errant clock... for about 10 second, then it reverts back.
I've tried all sorts of On/Off settings no change.
RPCEmu running RO 6.20
The clock shows the correct time
RPCEmu running RO 4.39
The clock shows the correct time.
RPCEmu running RO 4.02
The clock is showing the correct time.
Thanks for the thoughts Jeremy, appreciated. :-)
?
Dave
--
Dave Triffid
_______________________________________________
Rpcemu mailing list
Rpcemu@riscos.info
http://www.riscos.info/cgi-bin/mailman/listinfo/rpcemu
No comments:
Post a Comment