On Mon, Jun 06, 2016 at 01:01:03AM +0100, Reuben Thomas wrote:
> I'm running rpcemu 0.8.14 on an x86_64 GNU/Linux system (Ubuntu 14.04).
> I am using RISC OS 3.71, with StrongARM emulation, 2Mb VRAM selected, and
> 32Mb of RAM. I am not using dynrec (I found it unusably unstable) and I
> have "reduce CPU usage" selected.
The dynarec issue and the one you mention below are probably the same
thing ...
> I am running happily in 1024x768x256 colours. I have the (apparently
> default) AKF85 monitor selection.
> When I switch to 1280x1024, the display change normally works fine, but I
> get constant crashes until I switch back to 1024x768.
> Any clues?
> If I've failed to supply enough/the right information, do let me know!
The last version added auto patching for 8MB VRAM for RISC OS 3.7 if 2MB
VRAM is sslected. There's a bug in it (now fixed in the development
repository).
Basically to enable large screen modes in 3.7 select 0MB VRAM and find the
BandLimit line in the file !Boot.RO370Hook.Boot.PreDesk.Configure.!Run add
a 0 to the end of each of those numbers, this should allow larger
modes with 0MB VRAM (don't do this on a real machine, but it's fine on an
emulator).
Peter
--
Peter Howkins
peter.howkins@marutan.net
_______________________________________________
Rpcemu mailing list
Rpcemu@riscos.info
http://www.riscos.info/cgi-bin/mailman/listinfo/rpcemu
No comments:
Post a Comment